Home > News > Content
Water Pump Bearing FAG Deep Groove Ball Bearing
Jul 10, 2017

Water Pump Bearing FAG deep groove ball bearing

FAG deep groove ball bearing

FAG deep groove ball bearing is an all-purpose, self-retaining bearing with solid outer ring, inner circle and ball and retaining component. These products have simple design, long service life and easy maintenance. Can be divided into single column and double column design and opening and seal design. Because of the production technology used, the open bearing can still be transferred to the concave of the outer ring to be sealed or protected.

Because of low friction torque, they apply to high speed.

Contact ball bearing

A single row angular contact ball bearing is a self-sustaining unit that is composed of an inner ring and outer ring, as well as a ball and nylon, steel plate or brass retaining assembly. The inner and outer rings are offset by axial direction of the bearing. There are open and sealed bearings. They have very little self-tuning ability.

Many dimensions of angular contact ball bearings are designed by x-life. These bearings are displayed in the dimension table. The quality of x-life bearings has improved roll shape and optimized surface. This makes the fatigue limit load of the bearing significantly improved. Life expectancy has increased by more than 50% in the calculation of service life. Therefore, smaller bearings can be used when necessary in a particular application.

The double row angular contact ball bearing is a unit consisting of the inner and outer rings of the entity, the ball and the holding frame made of polyamide, stamping steel, or brass. They are structurally similar to a pair of o-shaped single row angular contact ball bearings, but are more compact. They have different sizes of contact Angle and bearing ring design.

The bearings can be open and sealed. Because of the production technology, the open bearing outer ring has a cutting slot for sealing or dustproof cover. Sealed bearings are not needed for maintenance, especially for bearing applications of the economy. Angular contact ball bearing has a small self-aligning range.

Roller bearing

FAG cylindrical roller bearing

Take to keep the single row cylindrical roller bearing is a kind of include the whole inner and outer ring, cylindrical roller and cage components of an assembly. On both sides of the outer ring in rigid guard or no guard, inner ring with one or two rigid guard, or no guard design. Keep the roller to avoid contact with the roller.

Cylindrical roller bearing is very rigid and can support high radial load, and it can be more suitable for high speed than full design. The bearing roller with the suffix E is larger, which is designed with high bearing capacity.

This bearing is detachable, so it is easier to install or dismantle it. The two bearing rings are thus well matched.

A single row cylindrical roller bearing can be used as a non-positioning bearing, semi-positioning bearing and positioning bearing.

High precision cylindrical roller bearing machine with double - row precision bearing. Allowable radial stiffness and high precision bearing configuration are mainly used for radial support of spindle.

Includes the overall outer ring without the edge, the whole inner circle of the three sides, the cylinder roller and the retaining frame of the brass retaining rack. In order to maximize the radial clearance, the inner circle design has a taper hole of 1:12. Cylindrical roller bearings can be disassembled, so this design makes installation removal easier. The two bearing rings are thus well matched.


Products List